 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| KLT15F Series 15 WATT, Universal Input Open Frame Switching Power Supply ELECTRICAL SPECIFICATIONS All specifications are typical at nominal input, full load INPUT SPECIFICATIONS Input Voltage...................................85 ~ 264VAC Input Frequency............................... 47 ~ 63Hz Input Current...............................0.2A Typ. Inrush Current..............................10A OUTPUT SPECIFICATIONS Output Voltage ...........................See Chart Efficiency...................................70% Typ. Over-Voltage Protection................CH1 only. Zener Limiter Over-Current Protection.................Automatic Recovery Ripple and Noise.........................See Chart Hold-Up Time..................................20 mS Load Regulation.............................CH1 - 100mV CH2, CH3 - 120mV Rise Time....................................100mS Leakage Current ................................100V - 0.5mArms FEATURES TRIPLE OUTPUTS LOW COST OPEN FRAME UNIVERSAL INPUT OVERVOLTAGE PROTECTION OVERCURRENT PROTECTION COMPACT, LOW-PROFILE PACKAGES 3 YEAR WARRANTY OPTIONAL CHASSIS AND COVER 230V - 0.75mArms Drift (8H, after 1H)....................0.5% +15 mV GENERAL SPECIFICATIONS Isolation Voltage Primary to Secondary...............3000VAC Primary to Case......................1500VAC Secondary to Case..................500VAC Isolation Resistance......................100 M-Ohms min. ENVIRONMENTAL SPECIFICATIONS Operating Temperature ...................0C ~ +60C Cooling..........................................Convection Temperature Coefficient................... 0.02% / C Humidity........................................20 ~ 85%Rh (non-condensing) Storage Temperature....................-20C ~ +85C Shock Vibration...........................Shock: 20G(3 Directions each 3 times) Vibration: 10 ~ 55Hz SAFETIES/APPROVALS UL60950 CSA C22.2 No. 60950(cUL) CE EN60950 3rd Edition (LVD) PHYSICAL SPECIFICATIONS Open Frame 1 MODEL KLT15F-0522 KLT15F-0533 OUTPUT 1 +5V +5V 2.0A 2.OA OUTPUT 2 +12V +15V 0.5A 0.45A OUTPUT 3 -12V -15V 0.5A 0.45A Ripple & Noise (mVp-p) 150mVp-p 150mVp-p MAX POWER NOT TO EXCEED 15WATTS KLT15F Note: * * * Phoenix connector shown. JST and Molex connectors available. Measurements in millimeter (mm) unless otherwise specified Tolerance 1mm NOTE: All specifications typical and nominal / full load and 25C unless otherwise noted. Avoid sustained operation in overload or dead short conditions. Specifications subject to changes without notice. 2 |
Price & Availability of KLT15F
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |